PPE application

The LS3 is PPE certified to 30kN maximum load. The manufacturer recommends to limit the force on the LS3 during PPE application to 10kN, whenever this is feasible, to retain a super safe 9:1 safety ratio. Therefore the LS3 is not restricted to any specific number of suspended persons but rather to a maximum load, which may never exceed 30kN in any PPE scenario, be it static or dynamic (peak) load!
All details about PPE load are described in detail on page 2, sections 1.2 and 1.3 of the PPE-Manual.
Anyone using the LS3 in PPE application must study and understand the PPE-Manual in full detail, which can be downloaded here: https://www.linegerip.com/LS3#manuals